How to Use a Spare Bung Plug for a Splash Pool

Quick Answer

To use a spare bung plug for a splash pool, simply remove the old plug, insert the new one into the drain opening, and press firmly to create a watertight seal. This straightforward fix prevents leaks and keeps your pet's pool ready for use.

Step-by-Step Installation

1. Drain and dry the pool: Empty all water from the pool and turn it upside down or tilt it so the drain area is accessible. Wipe the area around the drain opening with a clean cloth to remove debris or moisture. A dry surface helps the plug seat properly and reduces the chance of slipping during installation.
2. Remove the old plug: Grip the existing plug firmly and pull it out of the drain opening. If it is stuck, gently wiggle it side to side while pulling. Discard the old plug. Do not use tools that could scratch the drain opening. A damaged rim may cause leaks even with a new plug.
3. Insert the new bung plug: Align the spare bung plug with the drain opening and press it in evenly with your thumb or palm until it sits flush with the pool surface. The plug should feel snug and not wobble. If the plug does not go in all the way, remove it and check for debris or damage. Never force it, as that can deform the plug or the opening.
4. Test for leaks: Fill the pool with a small amount of water and watch the drain area for several minutes. If water seeps out, press the plug a bit more or remove and reinsert it. Once dry, the pool is ready for use. Testing with a shallow fill avoids a big mess if the seal is not perfect on the first try.

Product Facts

• Spare Bung Plug for Anti-Slip Splash Pool: The Spare Bung Plug is a replacement component designed specifically for the Barkshire Anti‑Slip Splash Pool. It provides a secure, leak‑preventing closure for the pool’s drainage opening. Using the correct plug ensures a proper seal, so you can fill the pool without worrying about water draining out or dirt getting in when stored.